philips semiconductors product specification trenchmos ? transistor BUK9515-100a logic level fet general description quick reference data n-channel enhancement mode logic symbol parameter max. unit level field-effect power transistor in a plastic envelope using ' trench 'v ds drain-source voltage 100 v technology which features very low i d drain current (dc) 75 a on-state resistance. it is intended for p tot total power dissipation 230 w use in automotive and general t j junction temperature 175 ?c purpose switching applications. r ds(on) drain-source on-state resistance v gs = 5 v 15 m w v gs = 10 v 14.4 m w pinning - to220ab pin configuration symbol pin description 1 gate 2 drain 3 source tab drain limiting values limiting values in accordance with the absolute maximum system (iec 134) symbol parameter conditions min. max. unit v ds drain-source voltage - - 100 v v dgr drain-gate voltage r gs = 20 k w - 100 v v gs gate-source voltage - - 10 v v gsm non-repetitive gate-source voltage t p 50 m s - 15 v i d drain current (dc) t mb = 25 ?c - 75 a i d drain current (dc) t mb = 100 ?c - 53 a i dm drain current (pulse peak value) t mb = 25 ?c - 240 a p tot total power dissipation t mb = 25 ?c - 230 w t stg , t j storage & operating temperature - - 55 175 ?c thermal resistances symbol parameter conditions typ. max. unit r th j-mb thermal resistance junction to - - 0.65 k/w mounting base r th j-a thermal resistance junction to in free air 60 - k/w ambient d g s 123 tab december 1998 1 rev 1.100
philips semiconductors product specification trenchmos ? transistor BUK9515-100a logic level fet static characteristics t j = 25?c unless otherwise specified symbol parameter conditions min. typ. max. unit v (br)dss drain-source breakdown v gs = 0 v; i d = 0.25 ma; 100 - - v voltage t j = -55?c 89 - - v v gs(to) gate threshold voltage v ds = v gs ; i d = 1 ma 1 1.5 2.0 v t j = 175?c 0.5 - - v t j = -55?c - - 2.3 v i dss zero gate voltage drain current v ds = 100 v; v gs = 0 v; - 0.05 10 m a t j = 175?c - - 500 m a i gss gate source leakage current v gs = 10 v; v ds = 0 v - 2 100 na r ds(on) drain-source on-state v gs = 5 v; i d = 25 a - 12.0 15.0 m w resistance t j = 175?c - - 40.5 m w v gs = 10 v; i d = 25 a - 11.5 14.4 m w v gs = 4.5 v; i d = 25 a - - 16.0 m w dynamic characteristics t mb = 25?c unless otherwise specified symbol parameter conditions min. typ. max. unit c iss input capacitance v gs = 0 v; v ds = 25 v; f = 1 mhz - 6500 8600 pf c oss output capacitance - 550 660 pf c rss feedback capacitance - 325 400 pf t d on turn-on delay time v dd = 30 v; r load =1.2 w ; - 45 65 ns t r turn-on rise time v gs = 5 v; r g = 10 w - 130 195 ns t d off turn-off delay time - 400 560 ns t f turn-off fall time - 130 190 ns l d internal drain inductance measured from contact screw on - 3.5 - nh tab to centre of die l d internal drain inductance measured from drain lead 6 mm - 4.5 - nh from package to centre of die l s internal source inductance measured from source lead 6 mm - 7.5 - nh from package to source bond pad reverse diode limiting values and characteristics t j = 25?c unless otherwise specified symbol parameter conditions min. typ. max. unit i dr continuous reverse drain - - 75 a current i drm pulsed reverse drain current - - 240 a v sd diode forward voltage i f = 25 a; v gs = 0 v - 0.85 1.2 v i f = 75 a; v gs = 0 v - 1.1 - v t rr reverse recovery time i f = 75 a; -di f /dt = 100 a/ m s; - 80 - ns q rr reverse recovery charge v gs = -10 v; v r = 30 v - 0.35 - m c december 1998 2 rev 1.100
philips semiconductors product specification trenchmos ? transistor BUK9515-100a logic level fet avalanche limiting value symbol parameter conditions min. typ. max. unit w dss drain-source non-repetitive i d = 35 a; v dd 25 v; - - 120 mj unclamped inductive turn-off v gs = 5 v; r gs = 50 w ; t mb = 25 ?c energy december 1998 3 rev 1.100
philips semiconductors product specification trenchmos ? transistor BUK9515-100a logic level fet fig.1. normalised power dissipation. pd% = 100 p d /p d 25 ?c = f(t mb ) fig.2. normalised continuous drain current. id% = 100 i d /i d 25 ?c = f(t mb ); conditions: v gs 3 5 v fig.3. safe operating area. t mb = 25 ?c i d & i dm = f(v ds ); i dm single pulse; parameter t p fig.4. transient thermal impedance. z th j-mb = f(t); parameter d = t p /t fig.5. typical output characteristics, t j = 25 ?c . i d = f(v ds ); parameter v gs fig.6. typical on-state resistance, t j = 25 ?c . r ds(on) = f(i d ); parameter v gs 0 20 40 60 80 100 120 140 160 180 tmb / c pd% normalised power derating 120 110 100 90 80 70 60 50 40 30 20 10 0 0.00001 0.001 0.1 10 0.001 0.01 0.1 1 d = t p t p t t p t d zth / (k/w) t/s d = 0.5 0.2 0.1 0.05 0.02 0 0 20 40 60 80 100 120 140 160 180 tmb / c id% normalised current derating 120 110 100 90 80 70 60 50 40 30 20 10 0 0246810 0 50 100 150 200 250 id/a vds/v vgs/v = 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 5.0 10.0 1 10 100 1 10 100 1000 id/a vds/v rds(on) = vds/id tp = 100ms 10ms 1ms 100us 1us dc 0 20406080100 11 12 13 14 15 16 17 18 19 20 rds(on)/mohm id/a vgs/v = 3.0 3.2 3.4 3.6 4.0 5.0 december 1998 4 rev 1.100
philips semiconductors product specification trenchmos ? transistor BUK9515-100a logic level fet fig.7. typical on-state resistance, t j = 25 ?c . r ds(on) = f(v gs ); conditions: i d = 25 a; fig.8. typical transfer characteristics. i d = f(v gs ) ; conditions: v ds = 25 v; parameter t j fig.9. typical transconductance, t j = 25 ?c . g fs = f(i d ); conditions: v ds = 25 v fig.10. normalised drain-source on-state resistance. a = r ds(on) /r ds(on)25 ?c = f(t j ); i d = 25 a; v gs = 5 v fig.11. gate threshold voltage. v gs(to) = f(t j ); conditions: i d = 1 ma; v ds = v gs fig.12. sub-threshold drain current. i d = f(v gs) ; conditions: t j = 25 ?c; v ds = v gs 345678910 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 rds(on)/mohm vgs/v 0.5 1 1.5 2 2.5 3 -100 -50 0 50 100 150 200 tmb / degc a rds(on) normalised to 25degc 0 0.5 1 1.5 2 2.5 3 3.5 0 20 40 60 80 100 id/a vgs/v tj/c = 175 25 buk959-60 -100 -50 0 50 100 150 200 0 0.5 1 1.5 2 2.5 tj / c vgs(to) / v max. typ. min. 0 20406080100 0 50 100 150 gfs/s id/a 0 0.5 1 1.5 2 2.5 3 1e-05 1e-05 1e-04 1e-03 1e-02 1e-01 sub-threshold conduction 2% typ 98% december 1998 5 rev 1.100
philips semiconductors product specification trenchmos ? transistor BUK9515-100a logic level fet fig.13. typical capacitances, c iss , c oss , c rss . c = f(v ds ); conditions: v gs = 0 v; f = 1 mhz fig.14. typical turn-on gate-charge characteristics. v gs = f(q g ); conditions: i d = 25 a; parameter v ds fig.15. typical reverse diode current. i f = f(v sds ); conditions: v gs = 0 v; parameter t j fig.16. normalised avalanche energy rating. w dss % = f(t mb ); conditions: i d = 75 a fig.17. avalanche energy test circuit. fig.18. switching test circuit. 0.01 0.1 1 10 100 0 5 10 15 20 thousands vds/v ciss coss crss 20 40 60 80 100 120 140 160 180 tmb / c 120 110 100 90 80 70 60 50 40 30 20 10 0 wdss% 0 102030405060708090100110 0 1 2 3 4 5 6 vgs/v qg/nc vds = 14v 80v l t.u.t. vdd rgs r 01 vds -id/100 + - shunt vgs 0 w dss = 0.5 li d 2 bv dss /( bv dss - v dd ) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.1 0 20 40 60 80 100 id/a vsds/v tj/c = 175 25 rd t.u.t. vdd rg vds + - vgs 0 december 1998 6 rev 1.100
philips semiconductors product specification trenchmos ? transistor BUK9515-100a logic level fet mechanical data dimensions in mm net mass: 2 g fig.19. sot78 (to220ab); pin 2 connected to mounting base. notes 1. observe the general handling precautions for electrostatic-discharge sensitive devices (esds) to prevent damage to mos gate oxide. 2. refer to mounting instructions for sot78 (to220) envelopes. 3. epoxy meets ul94 v0 at 1/8". 10,3 max 3,7 2,8 3,0 3,0 max not tinned 1,3 max (2x) 123 2,4 0,6 4,5 max 5,9 min 15,8 max 1,3 2,54 2,54 0,9 max (3x) 13,5 min december 1998 7 rev 1.100
philips semiconductors product specification trenchmos ? transistor BUK9515-100a logic level fet definitions data sheet status objective specification this data sheet contains target or goal specifications for product development. preliminary specification this data sheet contains preliminary data; supplementary data may be published later. product specification this data sheet contains final product specifications. limiting values limiting values are given in accordance with the absolute maximum rating system (iec 134). stress above one or more of the limiting values may cause permanent damage to the device. these are stress ratings only and operation of the device at these or at any other conditions above those given in the characteristics sections of this specification is not implied. exposure to limiting values for extended periods may affect device reliability. application information where application information is given, it is advisory and does not form part of the specification. philips electronics n.v. 1999 all rights are reserved. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, it is believed to be accurate and reliable and may be changed without notice. no liability will be accepted by the publisher for any consequence of its use. publication thereof does not convey nor imply any license under patent or other industrial or intellectual property rights. life support applications these products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify philips for any damages resulting from such improper use or sale. december 1998 8 rev 1.100
|
